使用电动门事项
Precautions for using electric doors
1、接通电源，启动门排，检查电动门的保护功能是否正常。
1. Turn on the power, start the door panel, and check if the protection function of the electric door is normal.
2、离合功能，可在停电时将电机的运行状态转换为手动状态。
2. The clutch function can switch the operating state of the motor to manual mode in the event of a power outage.
3、当您需要开启电动门时，可按控制箱或遥控器上的“开门”键，门体将自动向开门方向匀速运行，直至到位。
3. When you need to open the electric door, you can press the "Open" button on the control box or remote control, and the door body will automatically run at a constant speed towards the opening direction until it is in place.
4、当开关门时机头或门体卡住杂物时，应立即按“停止”键或切断电源，然后*杂物，以免造成不必要的损失。
4. When the machine head or door body gets stuck with debris when opening or closing the door, immediately press the "Stop" button or cut off the power, and then remove the debris to avoid unnecessary losses.
5、控制箱应放置在通风干燥处，以保证其性能稳定，延长电动门使用寿命。
5. The control box should be placed in a ventilated and dry place to ensure stable performance and extend the service life of the electric door.
6、需要关门时，按控制箱或遥控器上的“关”键，门体匀速向关门方向运行，直至到位。当要停止门体运行时，按“停止”键停止运行。
6. When it is necessary to close the door, press the "Close" button on the control box or remote control, and the door body will run uniformly towards the direction of closing the door until it is in place. When you want to stop the operation of the door body, press the "Stop" button to stop the operation.
7、当您购买具有遥控功能的电动门产品时，可以在遥控器上完成控制盒上的功能。遥控距离在20-30m之间（视现场而定）。如果遥控器距离比正常使用更近（或指示灯变暗），请更换线材。
7. When you purchase an electric door product with remote control function, you can complete the functions on the control box on the remote control. The remote control distance is between 20-30m (depending on the site). If the remote control is closer to normal use (or the indicator light becomes dim), please replace the wire.
