电源线和电机电源线的安装
Installation of power cord and motor power cord
当安装电动伸缩门的电源线和电机的电源线，则应该选择合适的铜芯护套线，并严格按照说明书的规范进行安装。所述电源和所述电源的中性导线的火线不能在安装了控制器的位置被反向连接。电动门马达和报警应连接到在机器中的指定终端块。因为有许多内部接线端子，记住不连接到倒车位置。
When installing the power cord of the electric telescopic door and the power cord of the motor, appropriate copper core sheathed wires should be selected and installed strictly in accordance with the specifications in the manual. The live wire of the power supply and the neutral wire of the power supply cannot be connected in reverse at the location where the controller is installed. The electric door motor and alarm should be connected to the designated terminal block in the machine. Because there are many internal wiring terminals, remember not to connect them to the reverse position.
2.布线安装
2. Wiring installation
安装接线时，高性价比的电动伸缩门会给出一个正确的连接指令。要小心，不要连接低压控制线和在反向的高电压控制线，否则会容易造成机器内部短路，导致要正确安装电动伸缩门。当不能适用门发生的情况。接线的这一步严格遵循电气安全操作。
When installing wiring, the cost-effective electric telescopic door will provide a correct connection instruction. Be careful not to connect the low voltage control line and the high voltage control line in the opposite direction, otherwise it may easily cause internal short circuits in the machine, leading to the need to install the electric telescopic door correctly. When the door cannot be applied. Strictly follow electrical safety operations in this step of wiring.
3.检查
3. Inspection
电动伸缩门的高度应很好地控制，并且从地面的距离不应大于指定的参数越高。此外，引线电缆应仔细沿着壁固定的，并且它们不应当被随机放置，这可能导致在电缆电路的损坏，并导致其它电路的问题。在接通电源前，安装的结果可以开启和使用前进行检查工作。
The height of the electric telescopic door should be well controlled, and the distance from the ground should not exceed the specified parameters. In addition, the lead cables should be carefully fixed along the wall, and they should not be randomly placed, which may cause damage to the cable circuit and cause problems with other circuits. Before connecting to the power supply, the installation results can be turned on and checked before use.
