How to install electric retractable door
电动伸缩门如何安装
1. Fix the door body: Put the door body of the electric telescopic door into the track, and the bottom support of the tail is fixed with a special fixing card and the expansion screw of the foundation.
1、固定门体：将电动伸缩门的门体放入轨道，尾部的底撑用专用固定卡及地脚膨胀螺钉固定。
2, limit switch: according to the opening and closing position of the set door body buried limit device.
2、限位开关：按照设定门体的开、关位置埋设限位装置。
3, fixed control box: the control box can be installed in the head box, or can be moved to the room within 10 meters from the main engine.
3、固定控制盒：控制盒可以装在机头箱内，也可移至离主机10米之内的室内。
4, connect the line: strictly according to the wiring diagram in turn to the corresponding connection (strictly prohibited in the energized state of wiring), wiring should be firm, terminals and terminals can not short circuit, and pick up the line is correct.
4、连接线路：严格按接线图依次接好相对应的连线（严禁在通电状态下接线），接线要牢固，端子与端子之间不能短路，并捡查线路是否正确。
